CMM Chicago Machinery Movers

Unloading a 25,000 lb Machine and Moving a Press Brake

By Igor Chudov, owner, Chicago Machinery Movers, Berkeley, Illinois. Moving and removing industrial machinery since 1998.

A grinding company in Melrose Park bought a used machine, and it was coming on a truck. The machine weighs about 25,000 pounds. Our job was to unload it from the truck and set it in place, and to move a press brake and one more machine within the company.

One of my foremen ran this job. The pictures are his. We used our 30,000 lb Towmotor diesel forklift. It is in every picture.

The forklift leaves our yard

The forklift went to the job on our hydraulic beavertail trailer. In the morning it drove up the ramps at our yard, and the truck pulled away with it.

The forklift drives up the ramps of the beavertail trailer, and the truck leaves with it. Sped up.

The press brake

The press brake was moved first, in the morning. In the first picture it stands on a concrete floor with sheet metal lying on it. Then it is going down the street on the forks, past a long brick building. Then it is in an aisle of a plant, between machines.

The press brake before the move

The press brake, with the forklift behind it.

Our forklift carrying the press brake down the street

The press brake going down the street on the forks.

The chain on the mast is a crucial safety measure, a "belt and suspenders" trick to keep the machine safely on the forks even if the forklift hits a bump.

The press brake on the forks in a plant aisle

The press brake raised on the forks in an aisle between machines.

The press brake on the forks, with the chain at the mast

The press brake on the forks, with a chain hanging at the mast.

The machine comes off the truck

The machine came on a flatbed trailer, on a wooden skid. An orange cabinet wrapped in plastic came on the same truck. The trailer was parked at the curb. The machine is a old used centerless grinder.

A CINCINNATI machine on a wooden skid on a flatbed trailer

The machine on its skid on the flatbed trailer, with the forklift at the side of the trailer.

Our 30k forklift in action

The forklift at the side of the trailer, and the orange cabinet wrapped in plastic.

The forklift came to the side of the trailer and put the forks under the skid. The machine was carried past the corner of the building, low to the ground.

The machine on the forks at the corner of the building

Passing the corner of the building.

Our forklift carrying the machine across the concrete

Carrying the machine across the concrete, low to the ground.

One more machine

The third machine in the pictures is an older one, with Cincinnati lettered on its base. In the last picture the machine that came off the truck is already on the plant floor.

An older Cincinnati machine on the forks

The older machine on the forks inside the plant.

A wide view of the plant aisle with our forklift/machine

The machine that came off the truck is on the floor at the left. The older machine is on the forks at the right.

The older machine is some kind of a centerless grinder that our customer purchased to grow their operation.

The forklift comes back

The truck brought the forklift back to our yard in the afternoon, and the forklift drove down the ramps.

The truck brings the forklift back, and the forklift drives down the ramps. Sped up. The orange spot is the low sun in the camera.

All job stories

Need a machine moved, or an old one gone?

☎ Call 630-235-6603